C Series Impact crusher
The C series impact crusher can realize the conversion of coarse and medium-fine crushing.It is suitable for various materials (granite, limestone, concrete, etc.) with compression strength not exceeding 350 MPa of rough, medium and fine crushing.It is widely used in mining, construction, chemical, electric power, metallurgy and other industries.
Highly wearing resistant materials for blow bars have longer life, C type design application changes the impact direction for higher efficiency; Blow bars lock is simple and reliable for easy replacement.
Larger inlet can reach 1000mm maximally, so it can work as primary crusher.
The hydraulic opening can easy the opening for maintenance, repair on inner parts.
High intense and heavy rotor has larger rotation inertia and crushing force, so it is better for big material.
The impact crusher uses impact energy to crush materials. When it is working, the rotor rotates at a high speed by the motor. When the material enters the action area of the hammer, it collides with the hammer on the rotor and then It is thrown to the counter-attack device for secondary crushing, and then rebounded from the counter-attack liner back to the hammer action zone to crush again. This process is repeated and the material size is from large to small to go to the first, second and third counter-attack chambers for repeated crushing until the material is crushed to the required particle size,then discharged from the discharge port. Adjusting the gap between the counter frame and the rotor can achieve the purpose of changing the discharge size and shape.